RC Helicopters: A Guide

Let’s say you have the best RC helicopter and it is your first time to try it to fly. The pre-flight and post flight checklist you need to follow in order that your RC helicopter flies smoothly and lands safely as well should be checked like every other real plane. You would want to check every time you fly a helicopter, before you take it up and after you’re done flying all of these things. These will guarantee that you don’t have a day of just buying parts and you will have a lot of good enjoyable hours on your helicopter with little things like these.

Turn the radio on first then you plug in the helicopter is the most important thing is to make sure that before you fly you. It is important to note that turning on the helicopters first and then the radios which the little receiver goes into a standby mode and doesn’t link to the radio which everyone thinks they got a bad helicopter. Remember is to turn on the remote first and you won’t have all of those problems then you’re all set. When plugging in the helicopter it has a jar on board which you have to remember. You need to make sure that as soon as you plug it in set it down on a flat surface and let it be still. Wait first for it to show the lights pop on. When you try to move it around after you have just plugged the gyro on it wouldn’t know what ‘still’ is. Every time you plug it in you have to set it down so it knows what means to be still. It will think that is ‘still’ means moving if move it around and not setting it down which the consequence is it will fly extremely radical. Flying it would be a problem afterwards. Don’t forget to fly it with a fully charged battery.

Here is a side checklist you need to do if you somehow crashed it on your first flight. On top of the main helicopter blades called the Y bar should be freely moving. It you try to hit it with your fingers it should be bouncing back and forth so you know it is not binding. It is very important that it can move as freely as possible because this is what keeps your helicopter stable. If the Y bar is tight, lockdown or binding that means your helicopter is going to fly very radically.
Why No One Talks About Resources Anymore

For post flight things to remember, you have to unplug the helicopter. The radio must be turned off. Keep them safe in a room temperature free from moist and sun exposure. Recharging the batteries for both remote control and the helicopter should not be forgotten.
If You Think You Understand Helicopters, Then This Might Change Your Mind

These pre-flight and post flight checklists will make sure that you will enjoy your RC helicopter for a very long time.